Vinyl Adhesive

A solvent-free acrylic polymer-based adhesive. Its excellent resistance against damage from vinyl plasticizer migration make it ideal for LVT and other types of vinyl-backed flooring. Sheet flooring installers may choose to lay in and re-position the floor covering while the adhesive remains in its initial wet state, while the installers of vinyl tiles and planks often prefer to lay in for up to 4 hours while the adhesive is in a dry-to-the-touch (pressure-sensitive) state. Its overall versatility and outstanding bond strength make the leading choice for both commercial and residential environments.

Key Features

• Designed for installing LVT as well as vinyl sheet goods.
• 99% RH moisture resistant*
• May be used in a dry-to-the-touch (pressure-sensitive) state, or as a wet-set.
• Excellent resistance against plasticizer migration
• 4 hours of Working Time available if needed

Standards

Greenline
SystemOne™
FloorScore^®
Best 10-Year

Use for:

When the specific guidelines for installation from the flooring manufacturer call for a fully adhered glue-down installation, use to install the following types of vinyl-backed flooring:

• LVT (luxury vinyl tile & plank)
• SVT (solid vinyl tile & plank)
• Homogeneous sheet vinyl
• Heterogeneous sheet vinyl
• Fiberglass encapsulated (cushion-backed) sheet vinyl
• Felt-backed sheet vinyl
• VCT (vinyl composition tile)
• VET (vinyl enhanced tile)

All substrates, all recommended flooring types:

Square-notch 1/16” D x 1/16” W x 1/16” A
Up to 250 sq. ft. / per 1 gal.  (up to 1,000 sq. ft. per 4 gal. pail)

Alternate trowel for extremely flat substrates:

U-notch 1/32” D x 1/16” W x 5/64” A
225 – 275 sq. ft. / per 1 gal. (900 – 1,100 sq. ft. per 4 gal. pail)

Note – minor imperfections on the surface of the substrate, such as concrete trowel marks and pitting, must not exceed the 1/32” (0.7 mm) height of the adhesive trowel ridge.

 Shelf life is 1 year, if unopened.

VOC: 2.3 g/L, SCAQMD 1168